基于三种干旱指标的朝阳市干旱特征分析

旱灾具有出现频率高、持续时间长、波及范围广等特点，本文运用降水距平百分率、Z指数、SPI标准化降水指数，对朝阳地区50a（1969～2018）干旱特征进行分析。结果表明：Z指数与SPI标准化降水指标得到的朝阳地区干旱特征情况基本一致，能较好地反映出该地区的干旱特征，朝阳地区1969～2018年自然灾害频繁发生，严重干旱年份主要集中在1980、1981、1982 年，与实际相符。     

Comparative study of EICP treatment methods on the mechanical properties of sandy soil

This study analyzed the effect of different treatment methods in enzyme-induced carbonate precipitation (EICP) on the mechanical properties of soil. Soybean crude urease was used to catalyze the precipitation of calcium carbonate (CaCO₃). A multiple-phase method was proposed and further compared with commonly practiced EICP treatment methods (including the one-phase method, two-phase method, and premix-and-compact method) from the aspects of chemical conversion efficiency, CaCO₃ precipitation distribution, permeability, and unconfined compressive strength. Based on the findings, the characteristics of each method were further discussed and summarized. Although the enzymatic CaCO₃ precipitation generated from all the treatment methods could potentiate the soil strength to a great or less degree, using the proposed multiple-phase method could bring about a high chemical conversion efficiency, uniform distribution of CaCO₃ as well as preferable permeability retention. In addition, the multiple-phase method could significantly improve the efficiency of urease usage.     

Understanding δ-Bi2O3 fluorite degradation mechanism and related solutions for promising applications in distributed multigeneration

Oxygen selective membrane on the base of cermet δ-Bi₂O₃/Ag with an interpenetrating structure has the maximum potential efficiency of air separation. However, the degradation processes, including the phase degradation of fluorite δ-Bi₂O₃, do not make it possible to create a membrane with the required perfection and durability. In this work, the ordering of oxygen vacancies with the transformation of fluorite into the rhombohedral phase (S.G. R-3) was studied by powder HT XRD in situ at 600 °C on dense Bi_0.78Er_0.2Hf_0.02O_1.51 ceramics. Fast regeneration of disordered fluorite occurs at T = 640–700 °C. The phase degradation of fluorite due to the segregation of dopants at the second stage leads into stable phases - sillenite, tetragonal or rhombohedral phase (S.G. R-3m), depending on the composition of δ-Bi₂O₃. Fast regeneration of fluorite occurs when heated to 820 °C, which is unacceptable for membranes. Analysis of all available data allows us to propose approaches to optimize the composition of δ-Bi₂O₃ and technical solutions for creating durable oxygen selective membranes with promising use in distributed multigeneration. As a result of the analysis, a new solid electrolyte with better parameters was obtained.     

ZnO·2.7Al2O3 nanocomposite with high optical transparency

Here we report a transparent dual-phase ZnO·2.7Al₂O₃ ceramic. The composite is pore-free and consists of thin nanosheets with a spinel phase and a hexagonal phase, while the two phases match closely in both lattice and refractive index. Such features result in excellent optical transmittance (maximum value >80% in the visible spectrum) at comparable phase volume. This work may provide a new thought for the rational structural design of optical nanocomposites.     

Effect of metallurgical evolution during post-weld aging treatment on localised corrosion of resistance spot welding joints of A286 superalloy

The combined effect of resistance spot welding and precipitation hardening on the localised corrosion of A286 superalloy is studied. The specimens tested by double loop electrochemical potentiokinetic reactivation were welded in the solution treated condition, and then subjected to different precipitation hardening treatments. For both base metal and weld nugget, the maximum localised corrosion is reached when η phase is clearly observable. The fact that the localised corrosion resistance of weld nugget is different from that shown by base metal may be explained by the segregation of Ni and Ti towards the interdendritic region of weld nugget (studied by using scanning electron microscope/energy dispersive X-ray analysis).     

退火工艺对激光选区熔化成形Ti6Al4V合金组织及室温力学性能的影响

以Ti6Al4V球形粉末为原料,利用激光选区熔化成形方法制备了Ti6Al4V合金试样,采用光学显微镜、扫描电镜及力学性能测试等手段,研究了退火工艺对Ti6Al4V合金室温力学性能及组织的影响规律。结果表明: SLM成形沉积态Ti6Al4V合金室温抗拉强度超过1200 MPa,而平均断后伸长率仅为4.0%;在650 ℃下进行真空退火处理,合金的抗拉强度仍保持在1200 MPa左右,规定塑性延伸强度R_p0.2高于1150 MPa,但试样的断后伸长率<10%;而在750及800 ℃下进行真空退火处理,合金试样的抗拉强度降至1100 MPa左右,规定塑性延伸强度高于1050 MPa,伸长率达到甚至超过10%,材料的综合强韧性得到明显提升。随着真空退火加热温度和保温时间的增加,SLM成形Ti6Al4V合金原始β晶界逐渐变模糊,晶粒趋向于等轴化。与此同时,快速冷却转变的α′针状马氏体未出现明显地粗化。     

氮对镀锡钢板的强化作用

通过物理化学相分析研究了3种不同氮含量镀锡板中固溶氮、化合氮的含量,结合相关理论计算了镀锡板中氮的固溶强化和析出强化对强度的贡献。结果表明:随着总氮含量从0.0021%提高到0.0103%,钢中化合氮含量下降10.1%,但是AlN析出相中的氮的含量上升10.7%。氮在提高镀锡板强度方面发挥重要作用,钢中总氮含量提高0.0082%,其对屈服强度的贡献值提升约30 MPa。     

选区激光熔化316L不锈钢的各向组织与性能

对采用选区激光熔化(SLM)制备的316L不锈钢增材制造试样进行了横向、纵向力学性能与微观组织分析。结果表明,增材制造SLM试件亚结构组织由尺寸为0.4 μm左右的胞状组织所构成,组织之间无明显的成分偏析,纵向与横向拉伸强度分别达到808和713 MPa,在经过1050 ℃热处理后,原组织中部分胞状组织消失,纵向及横向强度分别下降到673 MPa及579 MPa,增材制造试样相对传统热轧试样(550 MPa)具有明显的强度优势。SLM试样组织中存在未熔合缺陷,缺陷几何形状的方向性对其在拉应力作用下连接成裂纹有显著影响。热处理后缺陷长度方向与拉伸应力平行的纵向试样伸长率达到47.5%,横向试样伸长率为20%,伸长率指标均显著低于热轧316L钢试样,未熔合缺陷是导致3D打印试件塑性指标降低的主要因素之一。     

Plasmonic Oxygen-Deficient TiO2-x Nanocrystals for Dual-Band Electrochromic Smart Windows with Efficient Energy Recycling

Dual-band electrochromic smart windows capable of the spectrally selective modulation of visible (VIS) light and near-infrared (NIR) can regulate solar light and solar heat transmittance to reduce the building energy consumption. The development of these windows is however limited by the number of available dual-band electrochromic materials. Here, plasmonic oxygen-deficient TiO_2-x nanocrystals (NCs) are discovered to be an effective single-component dual-band electrochromic material, and that oxygen-vacancy creation is more effective than aliovalent substitutional doping to introduce dual-band properties to TiO₂ NCs. Oxygen vacancies not only confer good near-infrared (NIR)-selective modulation, but also improve the Li⁺ diffusion in the TiO_2-x host, circumventing the disadvantage of aliovalent substitutional doping with ion diffusion. Consequently optimized TiO_2-x NC films are able to modulate the NIR and visible light transmittance independently and effectively in three distinct modes with high optical modulation (95.5% at 633 nm and 90.5% at 1200 nm), fast switching speed, high bistability, and long cycle life. An impressive dual-band electrochromic performance is also demonstrated in prototype devices. The use of TiO_2-x NCs enables the assembled windows to recycle a large fraction of energy consumed in the coloration process (“energy recycling”) to reduce the energy consumption in a round-trip electrochromic operation.